Is the solution for connecting D-Link DSL-4320L Setup on Telstra NBN (HFC) the same as "accepted solution" for Telstra NBN (FTTN) by cf4 Level 24: Supreme Being (given September 2017)???
The only difference between Telstra NBN FTTN and ADSL apart from the it being VDSL is that the connection does not require a username and password.
When setting up modem set up as Dynamic IP (DHCP) as per page 68 of the manual
Was this helpful?
You need to plug the Ethernet cable from your NBN NTD (modem) in to LAN port 4 of the D-Link and then set the LAN port 4 up as the WAN port (change the WAN Access Type to Residential Gateway).
Thank you. What about the advice cf4 (When setting up modem set up as Dynamic IP (DHCP) as per page 68 of the manual) provided?
Yes, it should be set to Dynamic IP (DHCP).
Your reply has been very helpful, but I'm still confused about one thing ... the number of modems (modem/router) I need. As part of the Telstra package, they are meant to supply me with a SmartModem Gen 2. From your answers, I gather I must use that to connect to their device and then plug the D-Link into that. Is that correct?
If that is the case, what would I gain by having a D-Link in the setup?
You can connect the D-Link directly to the NBN box. You only need to use the Telstra modem if you want a phone service and you can connect the Telstra modem's WAN port to a LAN port of the D-Link modem. If you have trouble with incoming calls turn SIP ALG off in D-link. See SIP page 105 of manual
The benefit of the D-Link is you can customize more settings and some people claim the WiFi performance is better.
Thank you very much for your reply. Switching from ADSL to NBN is certainly more complicated than I thought it would be. Now, with your answer and those of Jupiter, I've got a better handle on it. This should be very interesting.
At present my ADSL is hard wired to 3 different users via a Netgear modem and a StarServe system that is wired throughout the house (both for data and voice). I have been using 2 seperate land lines, one for telephone and the other limited to data ... all hard wired. I certainly won't need 2 land lines any more and I wonder if I really need any since every member in the household is mobile provided. Mostly I've used the land line to phone relatives overseas (at ridiculously low cost), but I guess that can even be done via mobile.
I still haven't received the Telstra modem and technician is due on Thursday. I wonder what the technician will say when he looks at the way things presently are hooked up.
Thank you everyone for your replies. Yesterday, NBN technician visited and worked on installation of NBN (and the Telstra Gen2 modem arrived just before they were finished). Mercifully, everything, including the land line telephone, worked. The speed of the NBN connection was much slower than Telstra advertised ... about 12 rather than the 80-85 promised, but heaps better than the ADSL I was using that could only manage 0.75 at best. I will stick with the Gen2 modem for the time being and see if it suits. If not, thanks to your answers, I have all the information I need to connect a d-link modem/router.