Broadband & nbn™

Modems & Hardware

cancel
Ask a question
Advanced
image
  • All Posts
  • Answered
  • Unanswered
Hayjy
Level 1: Cadet
Gin1
Level 2: Rookie

Smart Modem Gateway 192.168.0.1 username: admin, password: password..as per set up book ..is invalid..?

Jk41
Level 2: Rookie

Hello
We have a tplink archer vr900. We have been using it with telstra adsl2 perfectly.
Now we have moved and have nbn. The nbn technician has been and the lines are working. I have now set up my computer and modem, plugged it in but no internet. The ...

rjmcinnes
Level 3: Gumshoe

I can hide (temporarily) non-connected Devices, but can’t find a way to delete obsolete Devices.
I changed the name of a AirPort Express, and now both the New and Old “Devices” are both listed..

techs
Level 3: Gumshoe

Hi All,  I've recently received a new Arcadyan LH1000 modem running firmware 0.07.05r via FTTN NBN.  I have a bunch of IP camera's and an NVR which all use their own dedicated port via Dynamic DNS for me to access them externally. Since receiving the ...

Chris_1
Level 1: Cadet

After successfully connecting the Smart Modem Gen 2 when I first got it, it immediately disconnected 2 mins later when I attempted to connect to the settings page. I have been trying to reconnect ever since with no luck, I just get a white light on t ...

Thorhearmeroar
Level 1: Cadet

My new smart modem only shows blue solid light. Is that because NBN technician is yet to come and hook us up next week. Should this stay blue until then.
Thank you

2old42long
Level 1: Cadet

need to change times for access for kidshave tried all sorts of passwords on the modem and WiFi access pass words have searched this site but nothing

Dump-Trump
Level 1: Cadet

Hi  Recently upgrade from bigpond cable to NBN. My old connection was a Telstra C6300, with my Netgear R6200 connected via LAN. I now want to add the R6200 to the new Smart Modem as an access point. Any ideas how I  go about this? I have tried connec ...

Scarpo
Level 1: Cadet

Hi
I have the Telstra booster **bleep** gen 1 I brought from Telstra about 3 months ago and I did have fast internet 100mps but now the booster only gives 30mps.
I have reset modems and boosters no luck, I disconnected the booster the modem gives 100mp ...

rjmcinnes
Level 3: Gumshoe

I can hide (temporarily) non-connected Devices, but can’t find a way to delete obsolete Devices.
I changed the name of a AirPort Express, and now both the New and Old “Devices” are both listed..

vK-2
Level 2: Rookie

Telstra Smart moden gen 2. I would like to have a different SSID for 2.4and 5 Ghz Wi-Fi. Can that be done?Smart modem gen 2. How do I turn off Telstra Air?

DTN1995
Level 1: Cadet

Hi i just got connected to nbn network and i bought a router but it wont connect to the modem, the router fails to connect on DHCP and ive tried my static ip details and PPPoE details but they dont work, any ideas? thanks!

bigchin
Level 3: Gumshoe

I have an existing cable setup with the CG3100D modem. Telstra recently sent me a Smart Modem Gen2 due to continual drop outs due to NBN work in the area.I have set up the 2 modems connecting the WAN ports on both devices but the SmartModem does not ...

Rochelle93
Level 1: Cadet

Hey, I’m pretty slow when it comes to technology but I have purchased a chromecast and can’t set it up as I have to enable my modems upnp, I have absolutely no idea how to do this and was hoping to get some advice!

Thank you

Tigga_1119
Level 1: Cadet

My partner and I got our new Smart Modem Gen 2 yesterday, it did not come with a user guide in the box and I changed the my account password, and I am able to log into my account, however I can not log into my modem.

I have seen in another thread that ...

Calculon
Level 1: Cadet

My cable broadband service (HFC) is installed, Telstra cable adaptor & Telstra smart modem all plugged in & working, but no internet. Apparently my service is still waiting to be activated/provisioned. The 4G backup isn't working, will my service nee ...

UsernameX1147
Level 3: Gumshoe

In My Account the last line for NBN Order Tracker is "Order Complete".When is an order considered complete by Telstra?I understand Telstra Techs have to run tests on our NBN connection before they close the order?Is it after those tests?

Neggy-Z
Level 1: Cadet

Hi, is it at all possible to have the smart modem connected behind my main router for home phone use?I can get the internet working and the phone can make out going calls but incoming calls go straight to voice mail, is there a fix for this? My main ...

Nostromo1
Level 1: Cadet

Hi I am currently on Cable with a Telstra Gateway (Netgear) Modem / Router. I am due to move to NBN soon. HCF. I want to use a Telstra Gen 2 modem (because of 4G backup), but also connect an Orbi Router/Satellite system (RBK50 - AC3000). Currently my ...

2old42long
Level 1: Cadet

need to change times for access for kidshave tried all sorts of passwords on the modem and WiFi access pass words have searched this site but nothing

LisaBowyer1
Level 1: Cadet
NowArriving
Level 1: Cadet

Hi all,

I've been considering getting mobile broadband bundled with the Nighthawk M2; however can anyone tell me if the high data usage issues that have been reported on these (and other forums) have been resolved?

Cheers,

https://www.telstra.com.au/int ...

shopkeeper64512
Level 1: Cadet

It seems that the IP Passthrough feature has been hidden in the firmware which Telstra installs on the Netgear NightHawk MR2100 devices. The old MR1100 device had this feature enabled. Was this a conscious decision by Telstra to remove access to this ...

tallywhacker
Level 1: Cadet

It seems that with the latest firmware update for the Smartmodem gen 2 (Firmware Version 18.1.c.0347-950-RC) Telstra have introduced a bug. It now looks like if you change the local device IP address and the DHCP start/end address the modem locks up. ...

keithMc
Level 1: Cadet

I have a customer that just added a second adsl Smart Modem Gen 2 [Technicolor DJA0231].The customer wants the new modem on line2 connected to the admin Lan because the downloads are faster than the line1 modem an older technicolor tg797n v3 modem.Wi ...

GZed
Level 2: Rookie

Hi all,
We currently have an SBS server network connect to the Internet via a Telstra NBN Business Smart Modem V7610. We also have 4 phone lines running off this NBN modem - Two lines in the back of the router and two more hanging off a Cisco SPA122.O ...

MaxSophie
Level 2: Rookie

My Telstra Smart Modem Gen 2 ( ARCADYAN) Firewall appears to be blocking internal SMB (port 445) packets between the WiFi and Wired networks. Gateway is Gen 2 Arcadyan LH1000 Firmware 0.07.05r I have a new Synology NAS connected to the gateway via Et ...

SightScreen
Level 2: Rookie

I just had my NBN installed today complete with the new Telstra Smart Modem, and the first thing I wanted to do was put it in Bridge Mode because I'd rather clear the way for my Netgear Orbi to distribute the Wi-Fi signal. The problem is, when I set ...

Rich210
Level 1: Cadet

I’m trying to setup a new M2 as a bridge to act as a a failover device. I can’t find the option to enable IP passthrough like we do with the M1.

Could someone please advise how to enable this basic functionality?

Our community experts

Telstra Smart Modem

Plug in and connect in minutes. Smart.

Find out more
Find out more about the Telstra 24x7 App ×
Manage your services and take advantage of offers while you’re out and about with the Telstra 24x7® App Download now
Earn points on our new rewards program and enjoy tier benefits like discounted movie tickets and moreFind out more

Need a hand or want to share your expertise?
Register for CrowdSupport and get involved

Register now