CrowdSupport®
Broadband & nbn™

Modems & Hardware

cancel
Showing results for 
Search instead for 
Did you mean: 
Ask a question
Advanced
image
  • All Posts
  • Answered
  • Unanswered
PeHenCat
Level 1: Cadet

Good morningwe have had NBN installed and want to connect our own Firewall / Router instead of the Telstra modem.What do we need to know / take into account when connecting our own router/ firewall?Will the IP address assign "dynamically from ISP"Whi ...

jsbrown724
Level 3: Gumshoe

Hi, the DJA0230TLS was updated recently to firmware 18.1.c.0443-950-RA, and since that point have noticed an increase in the number of drop outs and re-connections to NBN via FTTN (100/40).  Sync speed is the same roughly at 109/40 and has not degrad ...

OzEvenstar
Level 2: Rookie

Is the solution for connecting D-Link DSL-4320L Setup on Telstra NBN (HFC) the same as "accepted solution" for Telstra NBN (FTTN) by cf4 Level 24: Supreme Being (given September 2017)???The only difference between Telstra NBN FTTN and ADSL apart from ...

ausgumbie
Level 11: Detective

Hi all, A little hi-jinx to report with the DJA0230TLS Gen. 1 Smart Modem. Friday 8th Nov. (yesterday) my wife complained she couldn't connect to our 5GHz AP. It wasn't on the AP list any more. A trip inside the console showed the problem. Both the 2 ...

pennysat
Level 1: Cadet

Scanning to PC using FTP is set up and working OK with old modem.This is a Fuji/Xerox printer/scanner I am using and the printer side works OK but the scan to PC function using FTP appears to be blocked by the new modem.I have tried setting the firew ...

Thorpef1
Level 2: Rookie

Hi everyone. Yesterday a number of my devices disconnected from my Telstra Gen 2 smart modem. It seems to have completed  an automated firmware upgrade at around 8.30am yesterday as that's when my devices went offline and unable to connect.  Firmware ...

HI30
Level 1: Cadet

Hi, I am using the telstra smart modem Technicolor DJA0231 and since earlier today, the internet went down for 10 mins and after that I cannot use the 2.4 ghz band on any of the devices. I have a few smart plugs, tv, ip cameras which use the 2.4 ghz ...

cabat10
Level 1: Cadet

I reluctantly switched from ADSL to NBN about two weeks ago. I believe it's FTTN.Apart from two outages in less than a week :-( it appears to have transitioned ok.And then...My kids turned our Xbox 360 and no connection to the internet. This previous ...

EvilCSharp
Level 1: Cadet

Surely this is possible??I've just set up the Technicolor DJA0231 to be NBN ready and everything is working like a charm - PCs, mobile devices and my bridge router connecting all my home theatre devices (Smart TV, X Box, DVD/Amp and PVR.My HP 6500 is ...

MaxSophie
Level 3: Gumshoe

My Telstra Smart Modem Gen 2 ( ARCADYAN) Firewall appears to be blocking internal SMB (port 445) packets between the WiFi and Wired networks. Gateway is Gen 2 Arcadyan LH1000 Firmware 0.07.05r I have a new Synology NAS connected to the gateway via Et ...

Thorpef1
Level 2: Rookie

Hi everyone. Yesterday a number of my devices disconnected from my Telstra Gen 2 smart modem. It seems to have completed  an automated firmware upgrade at around 8.30am yesterday as that's when my devices went offline and unable to connect.  Firmware ...

Compvet46
Level 1: Cadet

Home phone on NBN router stopped working last week, checked and said "outage" at our address. After nearly 2 hours on mobile to NBN support, tried new phone cable, another phone which was working, many resets and trials, still no home phoneline???

chipp
Level 2: Rookie

HiIs it possible to find out when the software of my Smartmodem DJA0230 was updated ??Thanks in advance

GregW
Level 13: Super Sleuth

I have recently got a Gen 2 smart modem to enable me to extend my local network better with a Gen 2 booster also, as well as get better local network speeds which it has done. Unfortunately the Gen 2 modem connects to the NBN "slower" than the Gen 1 ...

EmptyG
Level 1: Cadet

Just got the Telstra smart modem gen 2 and I was told that the landline will active later on, let me use the mobile mode for now. I powered the modem and three lights are green, online, mobile mode and mobile signal. Also in the setting page shows (y ...

Elwood395
Level 1: Cadet

I have recently moved house and have experienced delays in having a fixed broadband connection installed, and I have been relying on the mobile backup connection in my Smart Modem for internet access. This worked well until about a day ago when the s ...

mvcad
Level 2: Rookie

Hi All, at the ens of the day I want to setup an OpenVPN server for my company to access the LAN from offsite Locations. so We bought an Asus RT-AC88u rourter which has this funcion built in. Initially I tried to set up the Telstra modem as bridge an ...

klnjlh
Level 1: Cadet

Hi, Trying to connect my network drive to my computers via SAMBA but turns out the new Smart Modem relies on the old SMBv1 protocol that got superseded by newer SMBv2 since 2007 and SMBv3 since 2012.
 Window's doesn't allow connections that require SM ...

sunshine1707
Level 2: Rookie

Hi all - we are now being forced to upgrade to NBN FTTC. I have a few questions- 1) Is the NBN Connection Device that plugs into the phone socket 'wireless' itself ? I just needed to confirmation please.  2) The Smart Modem that Telstra provides (whi ...

SJC33
Level 1: Cadet

Hi,I'm not yet connected to NBN but received Telstra Smart Modem DJA0231 for FTTN/FTTB. I believe we are getting NBN FTTC around 25 Oct. Will this modem work for FTTC? I havent tried to connect it yet as I already have Smart Modem for ADSL2+ connecte ...

PeHenCat
Level 1: Cadet

Good morningwe have had NBN installed and want to connect our own Firewall / Router instead of the Telstra modem.What do we need to know / take into account when connecting our own router/ firewall?Will the IP address assign "dynamically from ISP"Whi ...

Support Team Big_Dan
Support Team

The original thread has been archived, but for background, have a read of this one: https://crowdsupport.telstra.com.au/t5/Modems-Hardware/Gen-1-Smart-Modem-and-Pi-Hole/td-p/829088. I'm pleased to report that it truly was as simple as installing Pi- ...

jt67
Level 1: Cadet

I seem to have hit a snag with changing the SSID (Guest) on the modem. While I can change it etc. no issues, the Lan Interface still reflects the old (default) name. Fortunately the DHCP setting for the old name are applied. Possibly just a bug?

Tonka351
Level 1: Cadet

deagles
Level 1: Cadet

I've spent many hours over the last few days trying to get my recently supplied Arcadyn LH1000 "Smart Modem" properly running ... Telstra sent me a new one (with the 4G backup) due to service outage for a few days.   This replaced the Technicolor TG7 ...

wobblesack
Level 1: Cadet

I have 4 phone lines on DOT with 2 on the Telstra v7610 Gateway and 2 on the Cisco SPA112. I want to add a second SPA112 and take the 2 Lines off the v7610. I have bought the second SPA112 and configured in Call Conductor but the device will not work ...

wdurrani
Level 2: Rookie

Hi, Just and update that, if you are on Telsta or Belong NBN plans, and using some older PCs connected via Wifi (2.4Ghz) you may still experience extremely slow download speeds. Although there are claims that this issue may have been fixed in the sub ...

Fabrice1146
Level 1: Cadet

J'ai un Modem mobile telstra AirCard 790s mais comment peut-on obtenir un numéro telstra. Je suis au Burkina Faso.

rocket-
Level 2: Rookie

All is good, did as suggested phone is back to normal thank you.

wolfieboy
Level 6: Bloodhound

I received our new Telstra Smart Modem Gen2 with voice backuplast week and it was very easy to install and use straight away. All I had to do is enter the new Wi-Fi Name and Password on our smart phones, Samsung Tablets and Foxtel iQ4 set top box.  I ...

Our community experts

Telstra Smart Modem

Plug in and connect in minutes. Smart.

Find out more
Find out more about the Telstra 24x7 App ×
Manage your services and take advantage of offers while you’re out and about with the Telstra 24x7® App Find out more
Earn points on our new rewards program and enjoy tier benefits like discounted movie tickets and moreFind out more

Need a hand or want to share your expertise?
Register for CrowdSupport and get involved

Register now