Hi Everyone, For anyone looking to setup a standalone polycom VVX301 You will require these CUSTOM TAGS in the tipt telstra telephony portal to be added to the handset. You will not need to add the % to the tags as they are pre-defined. You will also need to login to the Collaborate portal and set the settings to internet.
TAG NAME: %BSOFTDIR_ENABLE%
TAG VALUE: 1
TAG NAME: %TIPT_CUSTOM%
TAG VALUE: certificate
TAG NAME: %TIPT_STATE%
(ALL STATES HAVE A DIFFERENT TAG )TAG VALUE: I-QLD
TAG NAME: %XSP_ADDRESS%
TAG VALUE: https://xsi-actions.tipt.telstra.com
You will need to then rebuild the TIPT device via the telstra telephony portal, click Identity/Device Profile Modify , Click rebuild the files, then restart the phone, this will need to be on your NEXTIP network for first time configuration, after the device restarts and starts up successfully, you then can plug it into another standard wifi network.
Was this helpful?
Can this work with 450's on DMS or only the VVX's
I've tested this on multiple VVX models successfully but cannot get it working on the 450's though have heard it can work but given no detail.
Dose anyone know of any additional or different custom tags needed for the 450's ?
Polycom Sound point IP range is not supported - only the VVX range ( therefore IP 450 will not work)