Kronos
Level 3: Gumshoe

LED Flood Light, how to activate motion sensor

Answered

Hi

can someone point me to instructions on how to activate the motion sensor in the LED Flood light.  ie. set sensitivity, set timer when motion detected, integrate sensor into automatons etc

ta

2 ACCEPTED SOLUTIONS

Accepted Solutions
343GuiltySpark
Level 23: Superhero
Level 23: Superhero
Accepted Solution

Re: LED Flood Light, how to activate motion sensor

They will only activate if its dark and detect motion. The sensitivity cant be changed and they stay on for roughly a minute when activated. The light can be added to existing automations or new ones.
I work for Telstra, but my opinions are my own and not that of Telstras

View solution in original post

Kronos
Level 3: Gumshoe
Accepted Solution

Re: LED Flood Light, how to activate motion sensor

Thanks for the response. The following information for future reference.

The detection sensitivity is fixed.

When light falls below 50 lx, the motion detection sensor is activated.

The light stays on for 90 seconds after motion is detected, the light on period is fixed. 

View solution in original post

Was this helpful?

  • Yes it was, thank you
  • No, I still need help
4 REPLIES 4
Yastiandrie
Level 24: Supreme Being
Level 24: Supreme Being

Re: LED Flood Light, how to activate motion sensor

I'm actually not 100% certain you can adjust the sensitivity level of the sensor but if you can it would be in settings > my devices

What do you mean by set a timer? What are you looking at doing?

It depends what you are looking at doing as an automation. It should appear as both a motion sensor as a trigger, and a light as an action, in automations.

When a floodlight is added into the app, it is added with some existing autonomy. When the light level drops below a certain threshold, the light should be coming on if motion is detected
I am a Complex Customer Service Specialist, nominally working with most assurance products. However, I am not an official representative on CrowdSupport.

IT Helpdesk and Technicial Support by Telstra Platinum
Helping Australians Find the Things that Matter Most with Telstra Locator
343GuiltySpark
Level 23: Superhero
Level 23: Superhero
Accepted Solution

Re: LED Flood Light, how to activate motion sensor

They will only activate if its dark and detect motion. The sensitivity cant be changed and they stay on for roughly a minute when activated. The light can be added to existing automations or new ones.
I work for Telstra, but my opinions are my own and not that of Telstras

View solution in original post

Kronos
Level 3: Gumshoe
Accepted Solution

Re: LED Flood Light, how to activate motion sensor

Thanks for the response. The following information for future reference.

The detection sensitivity is fixed.

When light falls below 50 lx, the motion detection sensor is activated.

The light stays on for 90 seconds after motion is detected, the light on period is fixed. 

View solution in original post

IvanS
Support Team
Support Team

Re: LED Flood Light, how to activate motion sensor

Hi @Kronos

 

Thank you for providing an update to assist the CrowdSupport community.

Need help? Check out our Community Wiki or Support Portal || Looking for a new mobile? Order online today || Get help with any Tech at Home with Telstra Platinum || Don't forget to tag answers as Accepted Solutions and give a Like to the member(s) who helped you out.

All moderation actions are supported by the CrowdSupport Community Guidelines

Telstra Smart Modem

Plug in and connect in minutes. Smart.

Find out more