LED Flood Light, how to activate motion sensor

[Kronos]

Hi

can someone point me to instructions on how to activate the motion sensor in the LED Flood light.  ie. set sensitivity, set timer when motion detected, integrate sensor into automatons etc

ta

[Yastiandrie]

I'm actually not 100% certain you can adjust the sensitivity level of the sensor but if you can it would be in settings > my devices

What do you mean by set a timer? What are you looking at doing?

It depends what you are looking at doing as an automation. It should appear as both a motion sensor as a trigger, and a light as an action, in automations.

When a floodlight is added into the app, it is added with some existing autonomy. When the light level drops below a certain threshold, the light should be coming on if motion is detected

[343GuiltySpark · Accepted solution]

They will only activate if its dark and detect motion. The sensitivity cant be changed and they stay on for roughly a minute when activated. The light can be added to existing automations or new ones.

[Kronos · Accepted solution]

Thanks for the response. The following information for future reference.

The detection sensitivity is fixed.

When light falls below 50 lx, the motion detection sensor is activated.

The light stays on for 90 seconds after motion is detected, the light on period is fixed. 

[IvanS]

Hi @Kronos, 

Thank you for providing an update to assist the CrowdSupport community.