Some of the links and information provided in this thread may no longer be available or relevant.
If you have a question please post a new topic.
Do you see any of these problems with your Netgear Nighthawk M1 / M2 / M5 Router?
Does your Router re-boot when the signal strength becomes low (RS-SINR < 0)?
When your Router re-boots is the Router's Global IPv6 address missing?
When your Router re-boots does your Router have DNS access?
When your Router re-boots is the Router's IPv4 address missing (0.0.0.0)?
Have you noticed any problems with your Wireless Broadband service since 5G was installed on the tower to which you are connected?
- 0 Likes
- 199 Views
- 1 Reply
Was this helpful?
- Yes it was, thank you
- No, I still need help
Re: Do you see any of these problems with your Netgear Nighthawk M1 / M2 / M5 Router?
Mine rarely reboots, but operates on just 1 bar of 4GX signal on Telstra repeater. It can lose the network when handed to a more distant/worse cell and I manually reboot it.
The reason 4GX has deteriorated is that Telstra have in almost all situations relocated the 4GX antennas from the prime / highest position on the tower or rooftop, and given that position to the 5G antennas. The 4GX antenna reception has noticeably deteriorated because of that.
P.S. I am referring to a M2 which is brilliantly fast
If I have helped you, a "Like" would be appreciated.
If my advice is a solution, please acknowledge it.
I'm not a Telstra employee.
50 + years exp. in radio comms., eg mobile phones since 1963, two-way radios, base stations, antennas & pagers. Expert in current Telstra Go repeaters & smart antennas.
"Being 76 years of age, entitles one to be an expert at everything!!"
- 2 Likes
- 0 Replies