trying to access http://m.home to read my messages

[toughlux]

i have just regestered and i cant retrive any messeges couse i dont have enough resorces
wtf

[MattyC]

Hi Toughlux. Thanks for coming through. What's the error message you're seeing there exactly? Can you paste it in here exactly please? - Matthew.

[rayjohn]

i have netgear night  i have messages cant read

[rockyracoon]

I have been unsuccessful in accessing http://m.home to read my messages etc,

[Peppy6]

I've also been trying to access my messages but it tells me the password is wrong every time. It's telling me my SMS memory is full. Don't know what to do about it.

[5672]

Can’t get any bloody sense from all the bull**bleep** offered

[Ravonu-53]

Trying to operate my net gear just received it everything is assembled but to get it going I am stuck can anyone help please

[Ravonu-53]

Dave good on you
I have iPhone Apple iPad which I want to use

[brab1]

---

@nik52 wrote:

I have a netgear nighthawk, it tells me constantly I have messages and to log into http://m.home   I have never been able to log in 

---

[reg66]

Cant log into my bigpond 

[reg66]

Trying to log into my bigpond account

[Lefty-97]

hello caff I just want to say thank you for the help I didn't post the question but your answer helped me, the only thing I had trouble with was figuring out how to read the messages from the app but I found it buy swiping down on the screen.

thank you again.

[ebc1]

It is quite simple,

click on the link  and then where it says admin on the sign in page ignore that

where it asks for password use your own selected password not the one that comes up on your netgear screen when you press the on off switch.

Then you have access to the messages for reviewing and deleting.

I have just done it 5 minutes ago and deleted three messages.

Eddie 

[gingerred]

just recently bought netgear it’s telling me i have msgs 2 which i have been unable 2 retrieve by using m.home

[Dani39]

Hi gingerred

You should be able to access the messages, and utilise other features and settings for the NIghthawk, through the Netgear Mobile app: http://tel.st/72cg5.

If this isn't working for you, our Mobiles teams on 13 22 00 or Netgear App support (http://tel.st/4hcyg) can investigate and advise further.

Please don't hesitate to let us know how you go, or contact us about any other matter. 

[Th08]

I have two messages and I am not able to access through m.home. 

What is the admin password

[Jimmy-Lo]

Hi @Th08

Normally the standard admin password is 'admin'.

Please give that a try and let us know how you go.

- Jimmy

[angels1234]

Cant get into the web address i was given to read the messagess

[pilotlight]

tried, failed.
what the hell are privaleges

[GJR1]

I geoffrey here I cannot log in

[244]

How do I clear the SMS messages on my Nighthawk wifi ?

[NannaDot1]

i keep getting message that I have 1 new alert
. K\How do i access it to read please?

[lynn2249]

trying to access http:/m.home to delete messages because its full

[46a]

This does not bloody work trying to access unread message

[HIXIE]

Me too.
Have you managed to work it out yet?

[Upul]

[dingdong]

Where the hell are the bloody messages

[Greg_Buch · Accepted solution]

The Netgar mobile app (http://tel.st/c5hbh) can also be used to access the messages

[marleneroes]

---

@nik52 wrote:

I have a netgear nighthawk, it tells me constantly I have messages and to log into http://m.home   I have had success once or twice but most times the page wont load.. Any ideas?

---

[S96]

I downloaded the app however not recognising my Netgear password?

[HIXIE]

I have the netgear App though there is no option to re set a forgotten password.
I am a telstra platinum member and have twice contacted them and they can not seem to work out a solution to the problem.

[Caaf]

Hi there,

If you’ve changed and forgotten the password on the M1 like most other routers you would have to reset it.

..

To perform a factory reset using the Reset button:
1. Make sure that the mobile router LED is lit to indicate that it is receiving power from the
battery.
2. Remove the cover on the bottom of the mobile router.
3. Place your thumbs on the arrows on the cover and press down while sliding the cover up.
4. Leave the battery in place.

5. Locate the Reset button.

6. With a sharp object such as a paperclip, press and hold the Reset button for five seconds. The mobile router returns to factory settings.

7. Replace the cover on the back of the mobile router.

Source to Netgeat M1 Manual

[ann1954]

same as me bloody hopeless

[compassion]

want access to update can never get to base for messages or anything.

[66647614]

Mobile broadband disconnected

[red151]

Very disappointed in the support team here. So many people have the same problem including me and I have not got any solution to the problem. I have tried some of the suggestions but to no avail.

[MYjessie2007]

---

@nik52 wrote:

I have a netgear nighthawk, it tells me constantly I have messages and to log into http://m.home   I have had success once or twice but most times the page wont load.. Any ideas?

---

[RC19]

I have 1 new alert on my Netgear modem and am trying to access my message via http://m.home?

[Dani39]

Hi @red151, @MYjessie2007, and @RC19

The Netgar mobile app (https://tel.st/zju4k) can also be used to access the messages. Don't hesitate to let us know how you go.

[rustydog50]

thanks i will try that

[RC19]

How do read my alerts when I login to http://m.home

[gus15]

how do i download update for my netgear