Broadband & nbn™

Modems & Hardware

cancel
Showing results for 
Search instead for 
Did you mean: 
Ask a question
Advanced
image
  • All Posts
  • Answered
  • Unanswered
Level 24: Supreme Being cf4
Level 24: Supreme Being

As there is no official manual for this modem I have written my own which I hope some people might find useful. It would probably have been better to post as a WiKi but I have never been able to post a WiKi successfully. The manual can be found at li ...

Community Manager ashliem Community Manager
Community Manager

You can view the latest Arcadyan Firmware Updates here.   Have a question about the latest update? This is the place for discussion!   Post a reply to this thread below to get involved with the discussion or ask a question.

mo18
Level 1: Cadet

Nbn

Hello. Have Telstra smart modem Technicolor DJA0231 . iPad and Samsung S8 connect successful with wifi . Bought Nokia 2.3 last week from Telstra shop prepaid. Android 9 ....update to Android 10 as available on Phone. BIG MISTAKE. WI FI now won’t conn ...

TrishGee
Level 2: Rookie

Hi.Telstra sent us a Smart Modem GEN2 LH1000. Supposedly it was a quick connect job.  While it is working we cannot add the port forwarding/static IP for our Hik Vision CCTV. It was working fine with the previous modem.  We took screenshots of all th ...

Noosavoyager
Level 1: Cadet

Hi, I have a Telstra router Netgear V7610. I have attached small usbs and larger drives to the rear port.These are seen in the Router settings for File share but I can find no way to see the actual files on any of the drives we have tried.They do not ...

HaroldAgazal
Level 1: Cadet

Hi! I received 2 NBN wifi box and I’m only using one . Can I give the other one away? since it has a mobile back up for my sister to use too 
would be great for her to save up  cheers 

eranda
Level 1: Cadet

Im only oder wifi  and i no need home phone

Phoebe98
Level 1: Cadet

I responded on September 12 that my NBN speed suddenly became very slow that day. We used the NBN method as before, without many devices connected. Telstra personnel still can’t find out what is wrong to slow down the network. It has been more than a ...

deejerydoo
Level 3: Gumshoe

Telstra's approach to security on their modems is farcical. Having username "admin" and password "admin" as standard means that all you need to do is get on to someone's WiFi network and you will be able to log in to their device with full admin righ ...

O-Kay
Level 1: Cadet

New update 0.12.09.r log showing thorGW. have reset from scratch, and not installed restore file.but constanly getting health check. Has been going on for days. 13.09.2020 12:45:09 health check case (SIP LOG)
13.09.2020 12:45:19 health check [ThorGW] ...

harrisc
Level 2: Rookie

Hi  I have a Telstra Gen2 SmartModem (Arcadyan LH1000) Please can you tell me how to put it into bridge mode

harrisc
Level 2: Rookie

Hi  I have a Telstra Gen2 SmartModem (Arcadyan LH1000) Please can you tell me how to put it into bridge mode

Frustrated01234
Level 1: Cadet

I have an HP Pavilion Laptop running Windows 8.1, with a built-in Ralink Network Adapter which provides WiFi access to a Wireless router. A few weeks ago, Internet access disappeared. I could still connect to the Internet via an Ethernet cable via Ho ...

Longy352
Level 1: Cadet

Will this booster work with the Telstra Gateway Modem which I think I have?

AMMPD
Level 1: Cadet

Just got a new Telstra Gen 2 Modem, as NBN has just come into our neighbourhood. We needed an NBN compatible modem, so Telstra sent us one, and we were under the impression we would stay on our current connection until the NBN properly connected. Set ...

Nhompo
Level 2: Rookie

Hi, installed new smart modem and wifi booster.Booster is in the lounge, modem kitchen.Would I be able to connect a cable from the booster to the PS4, giving me a cable connection, rather than wifi.Thank you.

buglaugs
Level 2: Rookie

I have a Uniden 1535 DECT 6.0 phone that I am trying to pair with my Telstra Smart modem. I have the latest firmware 18.1.c.0514-950-RB and I can get the phone to register with the modem by pressing the END and # keys and de-registering with the Unid ...

ggs
Level 3: Gumshoe

Telstra smart modem gen 2Home page Advance tab then WAN services tab, it shows DynDNS IPV4 and IPV6 with Status error with red dot , is this normal?? should it be like that or is there some settings problem, 

jcnl
Level 1: Cadet

We have a Telstra mode (Technicolor DJA0230TLS).Since yesterday it is not holding wifi connections. Phones and ipads drop connection once going to sleep mode and struggle to pick up again afterwards often asking to re-enter password then claiming pas ...

HamishMcG
Level 1: Cadet

Is there any way to change the default subnet on the Telstra Smart Modem Gen 2.  Modem Make Model: Technicolor DJA0231Firmware 18.1.c.0514-950-RB Need to change from 192.168.0.0/8 (255.255.255.0) to something else as I use this subnet on our internal ...

eranda
Level 1: Cadet

Im only oder wifi  and i no need home phone

Phoebe98
Level 1: Cadet

I responded on September 12 that my NBN speed suddenly became very slow that day. We used the NBN method as before, without many devices connected. Telstra personnel still can’t find out what is wrong to slow down the network. It has been more than a ...

Teej2
Level 1: Cadet

Modem can’t connect (DSL no signal) & the black box "nbn connection box" lights indicate it’s doing a firmware update. Black box has been doing this for over 24 hours and through multiple resets.No help from Telstra, what can I do?

Disappointed-59
Level 1: Cadet

My NBN smart modem turned up a couple of days ago and once connected as per instruction FTTN my land line phone has a low frequency hum present which is most annoying. I tried going back to the ADSL connection and the noise goes away. I have tried di ...

Galadore
Level 1: Cadet

Our fixed wireless wi fi signal doesn’t reach to our back room. The boosters From Telstra Say they don’t work with fixed wireless. Any suggestions on how to boost our signal? 

Danielle48
Level 1: Cadet

They link fine with the modem when I attach the yellow cable and all that but as soon as I locate it in the next room it goes through all the process but the light just ends up going back to red.They definitely work as I can rotate them with the the ...

Chenphn
Level 1: Cadet

HiTry to setup Parental Controls for GEM2 Modem, but time only accept in GMT time, not local.I have changed local time on Advance->Management, and confirm the Time show in Inof summary is showing local time. But Parental controls time can working at ...

Bandit5
Level 1: Cadet

after having ussues with nbn for over a week with no real understanding or help from telstra having been given links to services which don't work or unable to email us back we were finally told by a representative that it was our modem which was out ...

Banjo53
Level 1: Cadet

I am now on my second v7610 in 4 weeks. It works for a few hours on installation then starts disconnecting from the internet almost hourly requiring reboot. The username and password need to be re entered manually on each reboot. The current one is o ...

HaiVDang
Level 1: Cadet

Hi I have successfully set up my nbn however when I try to connect the wifi to my mobile/iPad, a login screen appears. I login and once I go out of the page it still doesn't connect to the internet. Can someone please help!!

Our community experts

Telstra Smart Modem

Plug in and connect in minutes. Smart.

Find out more