Broadband & nbn™

Modems & Hardware

cancel
Showing results for 
Search instead for 
Did you mean: 
Ask a question
Advanced
image
  • All Posts
  • Answered
  • Unanswered
Level 24: Supreme Being cf4
Level 24: Supreme Being

As there is no official manual for this modem I have written my own which I hope some people might find useful. It would probably have been better to post as a WiKi but I have never been able to post a WiKi successfully. The manual can be found at li ...

Community Manager ashliem Community Manager
Community Manager

You can view the latest Arcadyan Firmware Updates here.   Have a question about the latest update? This is the place for discussion!   Post a reply to this thread below to get involved with the discussion or ask a question.

northlakedude
Level 1: Cadet

I have just purchased an MU500 modem and a SIM to connect to 5G.Noticed that every 20 to 40 mins the modem seems to reset itself (Wifi drops, Telstra logo on modem screen, then it goes into checking data usage information then wifi comes back online. ...

Odyssey
Level 1: Cadet

How do I work out if the LH1000 modem's 4G fallback is ready to take over when my primary Boardband/NBN drops out without actually unplugging the primary Boardband/NBN?

Jakel
Level 1: Cadet

Hey all, Just a quick question - does anyone know if there is a possibility of getting an NBN plan without the Telstra crappy modem they push onto you? Im not sure why anyone would use a telstra modem when any modem/router over 150$ will do a better ...

eftimios
Level 1: Cadet

I have an Arcadyan Next Gen modem/router which I had set up with port forwarding for various small Raspberry Pi projects. It was all working until this morning. There was an NBN internet outage last night for about 15 minutes. When I look at the port ...

oz3d
Level 1: Cadet

I have turned off band steering on the Technicolor and NBN 100.Signals get halfway through my small house and drop off sharply and then stop as you move further down the hallway.At the half way point point I can dedicate my VR to the 5ghz band (works ...

Shinae
Level 1: Cadet

I’ve had my smart modem for about 2 weeks now and only this morning the light goes blue and there’s no internet connection at all. We’ve had no issues with it at all for 2 weeks and now it does this. I’ve already troubleshooted it and reset the whole ...

AquaIsGood
Level 2: Rookie

Hello, as I stated in the title my modem is not showing any lights on top but on the back it says green for both Wi-Fi and power. Please help with this since I don't know what to do now.

Shark8
Level 1: Cadet

HiOn my account I have an internet and data number for my NBN. It starts with an N and finishes with a R. Where do I find that on the modem? We have only 3 NBN services but I have six numbers ? Thank you

zerohapi
Level 1: Cadet

Evening all.

Apologies if there's the perfect solution out there for this in the forums, but I did have a look and couldn't see the answer.

My question: Is there a simplified setup procedure somewhere for using 3rd party routers on a HFC NBN?

My problem ...

harrisc
Level 2: Rookie

Hi  I have a Telstra Gen2 SmartModem (Arcadyan LH1000) Please can you tell me how to put it into bridge mode

djs_specs2
Level 1: Cadet

I've been searching around and I can't find any clear instructions on how to set up a HDD to be accessible wirelessly via my Smartmodem Gen 2 (could find instructions for the old Gateway modem though). Is there a reasonably idiot-proof guide floating ...

tc108
Level 1: Cadet

My Internet connection drops from time to time for 3-4 seconds.I noticed during this time the Online led on the modem, which is normally Green, turns to White.I checked the webpage of the modem but I see the "DSL Uptime" and  "Showtime" show more the ...

Frustrated89
Level 3: Gumshoe

My modem is a Technicolor DJA0231, Software Version 18.1.c, Firmware Version 18.1.c.0543-950-RA.Recently my smartphone and spare computer will not connect on wifi -were fine before. My iPad does connect. All lights look fine, I did a factory reset bu ...

Alpan
Level 1: Cadet

If I buy my own Smart Modem on Ebay can it be used with Telstra voip as the ones sent out on a new service are preconfigered how would a used one be set up?

TheGazza
Level 1: Cadet

Not sure if this is in the correct board.I am trying to set up a new wired connection from my NBN modem in the garage.I have a connection from UNI-D1 to kitchen where my WIFI router is. No problems with that but when I try to set up a wired connectio ...

Razdi
Level 1: Cadet

A mate of mine has a spare Telstra smart modem gen 2. I currently use a data sim for my home internet. If I were to borrow his modem, would it be possible to use it as a 4g router without any wired connection? And if it works, I know the usual 4g bac ...

mo18
Level 2: Rookie

Further to yesterday’s posts about  Nokia 2.3 to Telstra Technicolor DJA0231 Smart Modem wi fi issues. Tried today and changed modem settings DISABLED Band Steering on 2.4ghz band which meant it displayed   5G after network wifi name. My iPad and Sam ...

MildlyHelpful
Level 2: Rookie

Some TELSTRA SMART MODEM GEN 2 units may be defaulting to IPv6-only service during 4G-backup service periods. If you are experiencing this problem check the following advanced setting in your modem: HOME --> Login --> Advanced --> Internet --> LTE -- ...

Indaroom2
Level 1: Cadet

I need to prevent Ddos attacks from an xbox1

BobStep
Level 2: Rookie

Not sure where this fit's in the support model as it's a mix.I found a prior discussion on the lack of backup functionality. I've just been through the process of a factory reset by Telstra support without advance notice. An ongoing issue that suppor ...

Veegatica
Level 1: Cadet

I have plugged in cords all correctly and the light at the front of my modem is still blue and nbn blue light is flashing. 
I have tried everything. Turning it on and off, changing the area of the modem in the house, watching videos. Nothing is workin ...

HashtagIT
Level 1: Cadet

Hi Folks,I have updated the M2 to latest Firmware to NTGX24_10.17.03.00.I can connect various devices to the M2 for Internet access no issues and get pretty good speeds. However, when I connect a WIFI MFP Printer (Brand New with latest Firmware insta ...

Ishan
Level 1: Cadet

Hi Guys,I have an old nbn modem which was received when when I got NBN first like nearly 3 years back. Now the wifi signal is very weak and just wondering whether il be able to get a new one for the plan I am currently in as it was changed recently.

STANFORD1927
Level 5: Eagle Eye

Hi Everyone I received my new NBN connection box and modem on Friday. As the connection box only flickered blue lights I asked a question in Crowd Support about getting an up to date adapter for my phone which Jupiter kindly answered. I got the adapt ...

Think2
Level 1: Cadet

Hi.  My Telstra modem simply stopped working and will not power back on.  ’m in Melb, how can I swap it over at Telstra as they are not open ?

Think2
Level 1: Cadet

Hi.  My Telstra modem simply stopped working and will not power up.  I’m in Melb, how can I swap it over at Telstra as they are not open ?

Teej2
Level 1: Cadet

Modem can’t connect (DSL no signal) & the black box "nbn connection box" lights indicate it’s doing a firmware update. Black box has been doing this for over 24 hours and through multiple resets.No help from Telstra, what can I do?

Galadore
Level 1: Cadet

Our fixed wireless wi fi signal doesn’t reach to our back room. The boosters From Telstra Say they don’t work with fixed wireless. Any suggestions on how to boost our signal? 

Danielle48
Level 1: Cadet

They link fine with the modem when I attach the yellow cable and all that but as soon as I locate it in the next room it goes through all the process but the light just ends up going back to red.They definitely work as I can rotate them with the the ...

Our community experts

Telstra Smart Modem

Plug in and connect in minutes. Smart.

Find out more